en10219-1


    en10219-1, steel,Hot sell en10219-1, steel grade steel material stock in China,China en10219-1, steel grade steel material factory. Keeps more than 10,000 tons hot rolled and cold rolled en10219-1, steel grade steel material in stock each month. We can meet our customer's any quantity request. Based on these stock source, our advantage industry spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, machining and steel structure. We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find en10219-1, steel grade steel material plate/sheet supplier, en10219-1, steel grade steel material plate/sheet bar manufacturer, en10219-1, steel grade steel material plate/sheet bar exporter, please contact steel's sales team. We will give you the en10219-1, steel grade steel material plate competitive price, en10219-1, steel grade steel material plate good quality and best service from us.

Mechanical Properties

Cold formed welded structural hollow sections of non

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10219-1 April 2006 ICS 77.140.75 Supersedes EN 10219-1:1997 English Version

European Standard EN 10219-1 : 1997 has the status of a

European Standard EN 10219-1 : 1997 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by ECISS/TC 10. The responsible German body involved in its preparation was the Normenausschuß Eisen und Stahl

EN 10219- S355J2H SQUARE/RECTANGULAR HOLLOW

en 10219- s355nh square/rectangular hollow section BS EN10219-1 S275MLH square / rectangle hollow section BS EN10219-1 S355NLH square / rectangle hollow section

EN 10219-1 - European Standards

en 10219-1 Requirements for tolerances, dimensions and sectional properties are contained in EN 10219-2. NOTE A range of steel grades is specified in this European Standard and the user should select the grade appropriate to the intended use and service conditions.

User rating: 2.3/5

EN 10219|SQUARE AND RECTANGULAR HOLLOW

building products, square and rectangular hollow section mm-size.

EN10219 S275JOH Carbon Steel Pipe - HYSP | Steel Pipe

EN10219 S275JOH Carbon Steel Pipe. EN10219-1 specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.

93846 - xysteelpipe.ivy.arvixe

Title: 93846.tif Created Date: 9/27/2006 12:51:49 PM

S235JRH EN 10219 Carbon Steel Seamless Pipes and Tubes

circular hollow section-chs, square hollow section – shs, rectangular hollow section – rhs,en 10219-1/2 seamless tubular cold formed structural hollow sections, s235jrh en 10219 carbon pipes, en 10219 s235jrh pipes supplier, s235jrh en 10219 tubes exporter, s235jrh en 10219 tubing, s235jrh en 10219 carbon steel seamless pipes and tubes dealer, approved of mill test certificate s235jrh en

ThyssenKrupp Materials International - Stahlkontor Hahn

ThyssenKrupp Materials International Page 1 Material data sheet hollow section acc. to DIN EN 10219-1:2006 09/2011 Cold formed welded structural hollow sections acc. to DIN EN 10219 Material Data Sheet Steeldesignation: Name MaterialNo.

en 10219 pipe | EN 10219 tolerances | en 10219

en 10219, en 10219 equivalent, en 10219-2, en 10219 pdf, en 10219 standard, en 10219-1 pdf, en 10219 equivalent indian standard, en 10219-1 free download, en 10219 tolerances, en 10219-3, en 10219 pipe, en 10219 s355j2h, en 10219 specification, en 10219 1 standard, en 10219 s235jrh, en10219 equivalent astm, difference between en10219 & en 10210

European Standard EN 10219-2 : 1997 has the status of a

English version ICS 77.140.75 Descriptors: Hollow sections, structural steelwork, tolerances. Cold formed welded structural hollow sections of non-alloy and fine grain structural steels

BS EN 10219-1:2006 - Techstreet -Technical Information

This revision permits the publication of BS EN 10219-1 be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN Consultant.

S235JRH EN 10219 Carbon Steel Seamless Pipes and Tubes

circular hollow section-chs, square hollow section – shs, rectangular hollow section – rhs,en 10219-1/2 seamless tubular cold formed structural hollow sections, s235jrh en 10219 carbon pipes, en 10219 s235jrh pipes supplier, s235jrh en 10219 tubes exporter, s235jrh en 10219 tubing, s235jrh en 10219 carbon steel seamless pipes and tubes dealer, approved of mill test certificate s235jrh en

International Specifications Compared - Tubecon

International Specifications Compared Tubecon cold forms our structural welded steel hollow sections according to the SANS (South African National Standards) specification. EN 10219 -1 (1997) S275J2H 275 410 -560 -20 ASTM A500 (1996) Round Tubing Grade A 228 Min. 310 - Square and Re c

EN 10219 HSS - 日鐵住金建材株式会社

EN 10219 Dimensions Mass Area Second moment of area Radius of gyration Elastic section modulus Plastic section modulus Torsional inertia constant Torsional modulus constant Superfi cial area per meter length Nominal length Nominal size Thickness per tonne A x B t M A Ix Iy ix iy Zx Zy Zpx Zpy mm mm mm kg/m cm2 cm4 cm4 cm cm cm3 cm3 cm3 cm3 cm4

En10219-1 Ssaw Steel Pipe, En10219-1 Ssaw Steel Pipe

En10219-1 ssaw steel pipe products are most popular in Southeast Asia, Mid East, and South America. You can ensure product safety by selecting from certified suppliers, including 51 with ISO9001, 19 with OHSAS18001, and 19 with ISO14001 certification.

EN 10219-2 - European Standards

EN 10219-2 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties - This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size

En10219-1 Square Pipe Steel, En10219-1 Square Pipe Steel

A wide variety of en10219-1 square pipe steel options are available to you, such as 20#, 10#, and q235. You can also choose from astm, bs, and gb. As well as from gas pipe, oil pipe, and structure pipe. And whether en10219-1 square pipe steel is ce, api, or bsi. There are 12,140 en10219-1 square pipe steel suppliers, mainly located in Asia.

Cold formed welded hollow sections according to EN 10219

According to EN 10219-1 the following denotements are defined: CFCHS - cold formed circular hollow sections CFRHS - cold formed square or rectangular hollow sections . Common materials of which cold-formed hollow sections are made according to EN10219

EN 10219- S275J2H SQUARE/RECTANGULAR HOLLOW SECTION

BS EN10219-1 S275MLH square / rectangle hollow section; BEBON > BS EN10219 > Views EN 10219- S275J2H SQUARE/RECTANGULAR HOLLOW SECTION. EN 10219- S275J2H SQUARE/RECTANGULAR HOLLOW SECTION . S275J2H steel is non-alloy steel hollow sections under EN10219 standard. The characters J2 for the qualities with specified impact properties at -20

S355J2H structural hollow section according to EN 10210 - SSAB

SSAB Form . SSAB Form is designed to give maximum productivity in stamping, stretching, deep drawing, roll forming, bending, metal spinning and other cold forming procedures, particularly in production that requires exact and consistent properties.

SR EN ISO 10219-2 - scribd

profilului pentru 0 gama dimensionala Iimitata de dimensiuni sunt Conditiile tehnice de Iivrare sunt precizate In EN 10219-1. utilizate pentru proiectarea constructii1or (structurilor) sunt indicate In anexa B. .•. dreptunghiulare: dimensiunile exterioare pana la 500 mm x 300 mm.>tetolerantele pentru profilele cave deformate la rece pentru

EN 10219 Cold formed welded structural hollow sections of

EN 10219-2: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels.

PN-EN 10219-1,2 Structural steel tubes of non-alloy and

PN-EN10219-1,2. Cold finished structural welded hollow sections of non-alloy and fine grain steels. The scope of the standard includes: cold-formed round, square, and rectangular welded hollow sections without subsequent thermal processing.

ThyssenKrupp Materials International - Stahlkontor Hahn

ThyssenKrupp Materials International Pare 2 Material data sheet hollow sections acc. to DIN EN 10210-1:2006 09/2011 Mechanical properties at room temperature Steel grade YieldstrengthR eH N/mm² TensilestrengthR m N/mm² ElongationA 1"2" min.in% ImpactenergyKV 3" J min. Nominalwallthicknessinmm Nominalwall thicknessinmm

Welded steel tubes for pressure purposes Technical

Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties The European Standard EN 10217-1:2002, with the incorporation of amendment A1:2005, has the status of a British Standard ICS 23.040.10

DIN EN 10219-2 - Techstreet

DIN EN 10219-2 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:2006. standard by DIN-adopted European Standard, 07/01/2006 Amendments Available. View all product details

Structurals and Standard Pipe - tmk-group

89 Structurals and Standard Pipe TMK produces hot finished structural hollow sections of non-alloy and fine grain steel according to the standard DIN EN 10210-1,2 and cold-formed seamless and welded carbon steel structural

RECTANGULAR HOLLOW SECTIONS EN 10219 - 1 & 2 :

RECTANGULAR HOLLOW SECTIONS Thickness mm Size mm H x B T Mass kg/m M Thickness mm Size mm H x B T Mass kg/m M 90 x 50 100x50 3.0 3.2 3.6 4.0 4.9 5.0 5.6 6.0 6.3 7.1 8.0 3.2

S355J2H / 1.0576 Non-alloy structural steel - equivalent

EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Equivalent grades: No information : Chemical composition % of steel S355J2H (1.0576): EN 10210-1-2006 Chemical composition of steel S355J2H (1.0576), Standards of steel S355J2H (1.0576) Mechanical Properties of

Ferona online - Profil dutý svařovaný černý s obdélníkovým

FERONA a.s. Profil dutý svařovaný černý s obdélníkovým průřezem, EN 10219, rozměr 40x20x2

DIN EN 10219-2 - 2006-07 - Beuth.de

DIN EN 10219-2 - 2006-07. We use cookies to make our website more user-friendly and to continually improve it.

Buizen voor toepassing onder druk Oud Nieuw

Gelast DIN 17120 St.37.2 EN 10219-1/2* S235JRH Gelast DIN 17120 St.52.3 EN 10219-1/2 S355J2H Naadloos DIN 17121 St.37.2 EN 10210-1/2* S235JRH Naadloos DIN 17121 St.52.3 EN 10210-1/2 S355J2H Buizen voor leidingen Oud Nieuw Uitvoering Norm Kwaliteit Norm Kwaliteit Gelast API 5L Grade B EN 10208-2 L245NB

Hot rolled products of structural steels

EN 10219-1). The technical delivery conditions apply to thicknesses ≥ 3 mm and ≤ 150 mm for long products of steel grade Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or

BS 1139,EN39,EN10219 Scaffolding Tube & Accesseries

BS 1139,EN39,EN10219 Scaffolding Tube & Accesseries. Product testing and in compliance to EN10219-1:2006. Surface: hot dipped galavanized , electro galvanized ,painted, engraved . Packing: Hexagonal bundles of max. 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper

Basic catalogue - Standards, dimensions and grades

2 rff.de All basics. Also online available. The digital basic catalogue of rff: rff.de/en/basics

TOLERANCES ACCORDING TO UNI EN 10219

TOLERANCES ACCORDING TO UNI EN 10219 STANDARDS CHARACTERISTIC HOLLOW PROFILES WITH ROUND SECTION HOLLOW PROFILES WITH SQUARE / RECTANGULAR SECTION Outside dimensions (D, B e H) ± 1% with a minimum of = 0.5 mm and a maximum of ± 10 mm Length of sides mm Tolerance H, B <100 100< H, B <200 H, B >200 = 1 % with a minimum of ± 0.5 mm = 0.8%

Hot rolled products of structural steels

EN 10025-1:2004 (E) 4 Foreword This document (EN 10025-1:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels - Grades and qualities”, the secretariat of

TEVI PENTRU CONSTRUCTII Patrate , Dreptunghiulare si

SR EN 10219-1:2006 si SR EN 10219-2:2010 Denumire: Profile cave deformate la rece pentru construcţii, din oţeluri de construcţie nealiate şi cu granulaţie fină/ Cold formed welded structural hollow sections of non-alloy and fine grain steels Domenii de utilizare

EN10219 S355J2H Square Tube heat treatment ----Katalor

EN10219 S355J2H Square Tube heat treatment The usage of the S355J2H square tube is mainly on machinery manufacturing, steel construction projects, shipbuilding, solar power stents, steel structure engineering, electricity etc.

Y X T BS EN 10219-1,2 : 1997 Nominal dimensions and

Nominal dimensions and sectional properties of rectangular hollow sections 20 20 20 30 30 30 40 40 40 50 50 50 BS EN 10219-1,2 : 1997 20 x 20 25 x 25 60 x 60 60 x 60 60 x 60 80 x 80 80 x 80 80 x 80 90 x 90 90 x 90 90 x 90 100 x 100 100 x 100 100 x 100 Nominal dimensions and sectional properties of square hollow sections 2.0 2.0 2.5 3.0

SQUARE HOLLOW SECTIONS EN 10219 - 1 & 2 : 2006

SQUARE HOLLOW SECTIONS Thickness mm Size mm H x B T Mass kg/m M 25 x 25 EN 10219 - 1 & 2 : 2006 30 x 30 40 x 40 2.89 3.41 3.61 4.39 5.20 5.28 2.5 3.0 3.2 4.0 4.9 5.0

Scope of EN 1090-1 – Clarification Document - BSI Group

Scope of EN 1090-1 – Clarification Document . This document has been submitted to the European Commission as the UK view on the scope of EN 1090-1. After discussions, including with the European Technical Cold-formed steel tubes EN 10219-1 Steel casting EN 10340 Q and T steels EN 10343 Fabricated steel tanks EN 12285-2

S355J2H - Dosamet

S 355 J 2 H (Italy 1 UM) Structural and constructional steels EN 10219-1 Cold formed welded structural hollow sections Of circular, square or rectangular form intended for use S355J2H S 355 J2H (Rost 52-3) 1.0576 S 355 J2 H c 0563 c 0562 1.0576 Cross Reference Table Standard DIN

BS EN 10219-2 - Cold formed welded structural hollow

Stockist and supplying pipes EN 10219-2 Cold formed welded structural hollow sections of non-alloy and fine grain steels - india mumbai maharashtra, +91 (022) 43431 324 BS EN 10219-2 - Cold formed welded structural hollow sections of non-alloy and fine grain steels . GRADES : EN 10219-1. EN 10305-1. EN 10025-2. EN-10025-6. EN 10028-3

Carbon and stainless steel pipes for the

Carbon and stainless steel pipes for the transportation of liquids and gases ThyssenKrupp. The area of materials management is placing ever greater demands on companies and employees, with improved profitability one of the key objectives. Greater efficiency in procurement will be

Tolerances to EN 10029 for hot rolled plate 3mm and above

Tolerances to EN 10029 for hot rolled plate 3mm and above General. This standard covers a wider group of steels than just stainless: Non-alloy and alloy steels including stainless steels with:

20 inch EFW Steel Pipe EN10219-1 S235JRH, View EFW Pipe

20 inch EFW Steel Pipe EN10219-1 S235JRH, US $ 800 - 895 / Ton, BS, BS EN10219, ST35-ST52.Source from Chengdu Derbo Steel Co., Ltd. on Alibaba.

BS EN 10219 -1 Free pdf download - docdatabase.net

BS EN 10219 -1 PDF View and Downloadable. pdf file about BS EN 10219 -1 pdf selected and prepared for you by browsing on search engines. All rights of this BS EN 10219 -1

G 2/06 - Wikipedia

G 2/06 is a decision by the Enlarged Board of Appeal of the European Patent Office (EPO), which issued on 25 November 2008. In its answer to question 2,

Carbon and stainless steel pipes/tubes for mechanical

Carbon and stainless steel pipes/tubes for mechanical engineering and structural applications ThyssenKrupp. The area of materials management is placing ever greater demands on companies and employees, with improved profitability one of the key objectives. Greater efficiency in procurement will be

Designation systems for steels - Part 1: Steel names

EN 10027-2, Designation systems for steels - Part 2: Numerical system EN 10079:1992, Definition of steel products 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 10020:2000 and EN 10079:1992 apply. 4 Principles 4.1 A unique steel name There shall be one unique steel name for each steel.

What are hollow sections according EN 10210? - e-metallicus

Hollow sections according EN 10210 are nowadays one of the most versatile and the most frequently used (semi)products made from steel. What are hollow sections according EN 10210? NOTE!

EN 10210-1+2 S355J2H steel pipe, s355j0h seamless pipe

SEAMLESS STEEL PIPE IN EN10210-1+2(2006/EN10297-1+2(2006) Application. For construction of chemical plant,vessels,pipework and for general mechanical engineering

B Erw : En10219 1 S235j0h Pipe Steel – Wallpapers Home

artspace712 -En10219 1 S235j0h Pipe Steel EN 10219 Structure Pipe S355JOH Pipe HYSP is one of the greatest S355JOH Pipe Manufacturer in north China. Our S355JOH Steel Pipe is manufactured according to EN 10219-1 specifications, which is the British Standard for Cold formed welded structural hollow sections of non-alloy and fine grain steels.

EN 10025 - Wikipedia

EN 10025 - Hot rolled products of structural steels refers to a set of European standards which specify the technical delivery conditions for hot rolled products

EN-10219-1 - COLD FORMED WELDED | HOLLOW SECTION

BS EN 10219-1 - Cold formed welded structural hollow sections of non-alloy and fine grain steels . Grades : EN 10219-1 S235JRH , EN 10219-1 S275J0H , EN 10219-1 S275J2H , EN 10219-1 S355J0H , EN 10219-1 S355J2H, EN 10219-1 S355K2H.

STN EN 10219-1 | SUTN

Zvárané duté konštrukčné profily z nelegovaných a jemnozrnných ocelí tvárnené za studena. Časť 1: Technické dodacie podmienky

UNE EN 10219-1 : 2007 | COLD FORMED WELDED

buy une en 10219-1 : 2007 cold formed welded structural hollow sections of non-alloy and fine grain steels - part 1: technical delivery conditions from sai global

DIN EN 10219-1 : Cold formed welded structural hollow

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.

ÛÒ ïðîïŒóº - sanyosteel

EN 10216-5:2004 (E) 4 Foreword This document (EN 10216-5:2004) has been prepared by Technical Committee ECISS/TC 29 "Steel tubes and fittings for steel tubes", the secretariat of which is held by UNI.

CEN - EN 10219-1 - Cold formed welded structural hollow

Find the most up-to-date version of EN 10219-1 at Engineering360. CEN - EN 10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

BS 5950, Tolerances, Rolling Tolerances to EN 10219-2:1997

Tata Steel in Europe. Tata Steel Europe is Europe's second largest steel producer. With main steelmaking operations primarily in the UK and the Netherlands, Tata Steel Europe supplies steel and related services to the construction, automotive, packaging, mechanical engineering and

EN 10219 S355JR ERW Carbon Steel Pipe - Guangdong Lizz

EN 10219 S355JR ERW Carbon Steel Pipe We own one ERW pipe production line, one casing and coupling process line and external and internal coating line leading to the annual production capacity of 80,000 tons, with diameter from Φ21-Φ610mm.

BS EN 10219-1:2006 Cold formed welded structural hollow

Supersedes BS EN 10219-1:1997. This standard is a Harmonised European Standard (hEN). Publisher Information British Standards Institution. With over 100 years of experience the British Standards Institute is recognised as the UK’s National standards body. Their committees work with the manufacturing and service industries, government

EN10219-1 S235J0H Pipe steel - CFST (China Manufacturer

Hebei Changfeng Steel Tube Manufacturing Group Co., Ltd. No. 5 Beihai Road, Economic & Technical Development Zone, Cangzhou, Hebei, China Phone:

Round EN 10219-1 S355JOH Pipe, Size: 0-1 Inch, 1-2 Inch, 2

The diameter for the EN 10219-1 spiral seam steel pipe ranges from 273mm to 3040mm and the wall thickness from 5mm to 30mm. Applications The EN 10219-1 spiral seam steel pipe is regularly used in construction industry.

EN10219-1 Roll Forming Steel Tubing Rectangle Zhongshun

EN10219-1 Roll Forming Steel Tubing Rectangle Zhongshun's roll forming steel products which cover a wide range of applications have been applied in construction machinery, container, steel structure, metal equipment, elevators, machinery, lifting machinery, solar energy, bridge, bus and ship, etc.

ČSN EN 10219-1 - Náhled - csnonlinefirmy.unmz.cz

Evropská norma EN 10219-1:1997 má status české technické normy. This standard is the Czech version of the European Standard EN 10219-1:1997. The European Standard EN 10219-1:1997 has the status of a Czech Standard. Nahrazení předchozích norem.

Cold formed welded structural hollow sections of non

EN 10219-1:2006, Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 10219-1:2006 apply. 4 Symbols

БДС EN 10219-2:2006 - bds-bg.org

This part of EN 10219 specifies tolerances for cold formed welded circular, square and rectangular structural hollow sections, manufactured in wall thicknesses up to 40 mm, in the following size ranges: Circular: Outside diameters up to 2 500 mm Square: Outside dimensions up to 500 mm x 500 mm Rectangular: Outside dimensions up to 500 mm x 300 mm The formulae for calculating sectional

Hollow Sections Distributor, Source for Hollow Sections

en 10210-1/2 seamless tubular hot finished structural hollow sections, en 10219-1/2 welded / erw / efw hollow sections made from hot rolled steel strip by cold forming & welding S235JR EN 10210-1 / EN 10210-2 CHS Circular Hollow Sections - Available ex-stock

Pipes (Dimensions and Weights) Content

Pipes (Dimensions and Weights) 17.0 2013-10 Content Threaded Tube DIN EN 10255 [as a replacement for DIN 2440] 17.1 Copper Pipes DIN EN 1057 [as a replacement for DIN 1786] 17.1 Steel Pipes DIN EN 10220, seamless [as a replacement for DIN 2448] 17.2 Steel Pipes DIN EN 10220, welded [as a replacement for DIN 2458] 17.3

SRPS EN 10219-1:2011 - iss.rs

This part of this European Standard specifies the technical delivery conditions for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.

EN 10025 S355JR steel - ice-steels

EN 10025 S235JR steel mechanical property: S355JR steel plate is one mainly of low alloy steel, S355JR steel plate is a type of steel sheet under EN standard which

En10219-1 S355j0h ERW Steel Pipe Outside Diameter 660.4

Steel Pipe, Carbon Steel Pipe, Erw Steel Pipe manufacturer / supplier in China, offering En10219-1 S355j0h ERW Steel Pipe Outside Diameter 660.4, Weld Tube ERW Pipe API 5L ASTM A53 GR.

DIN-EN-10219-1 | Cold formed welded structural hollow

DIN-EN-10219-1 › Complete Document History Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions; German version EN 10219-1

EN 10025 S275JR steel - ICE steel s

S275JR steel plate/sheet, EN 10025 S275JR steel plate/sheet, S275JR steel plate/sheet supplier/Chinese supplier, S275JR steel plate/sheet price, S275JR steel plate/sheet mechanical property.. EN 10025 S275JR steel equivalent grade: S275JR steel plate/sheet is in EN 10025 standard, the material number is 1.0044.

SSAW Steel Pipe, Spiral Submerged Arc Pipe

BS EN10219-1: Cold formed welded structural hollow sections of non-alloy and fine grain steels - part1: Technical delivert conditions: BS EN10219-2: Cold formed welded structural hollow sections of non-alloy and fine grain steels - part2: tolerances dimmsions and sectional properties

Uzavřené profily a trubky - KOVONA.CZ

ČSN EN 10219-1, ČSN EN 10305-5, (DIN 2394-2), ČSN EN 10255-A1, ČSN EN 10217-1 po dohodě elektro-magneto-induktivní metoda zkoušení NDT vířivými proudy podle ČSN EN 10246-1,3 na požádání Prodej pouze po ucelených svazcích (1 000 – 1 500 kg)

AS/NZS 1163 Cold Formed Welded Rectangular Tubes

EN 10219-1 & 2 Cold Formed Welded Rectangular Tubes Nominal dimensions and sectional properties of rectangular hollow sections. AS/NZS 1163 Cold Formed Welded Rectangular Tubes Nominal dimensions and sectional properties of rectangular hollow sections TOLERANCES ON SHAPE AND MASS: External dimensions

EN 10219-1 & 2 Cold Formed Welded Square Tubes

EN 10219-1 & 2 Cold Formed Welded Square Tubes Nominal dimensions and sectional properties of square hollow sections 6 6 4 12 9 9 6 6 6 4 12 9 9 6 4 4 9 9 9 4 Size ( BXB) mm Pieces/ bdls 6 x 6 150 x 150 160 x 160 7 3/32 x 7 3/32 180 x 180 6 3 /10 x 6 3 10 0.315 0.394 0.472 0.157 0.197 0.236 0.315 0.354 0.394 0.472 0.157 0.197 0.236 0.315 0.394

Welded circular steel tubes for mechanical and general

and general engineering purposes Technical delivery conditions engineering purposes - Technical delivery conditions - Part 2: Stainless steel Tubes ronds soudés en acier pour utilisation en mécanique for mechanical and general engineering purposes.

ČSN EN 10219-2 (425953) - Svařované duté profily z

S touto normou zákazníci nejvíce kupují. ČSN EN 10219-1 (421052) Svařované duté profily z konstrukčních nelegovaných a jemnozrnných ocelí, tvářené za studena -

British standards (BS) & codes related to steel construction

BS EN 10219-1 : 1997 : cold formed structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements BS EN 10248-1 : 1996 : hot rolled sheet piling of non alloy steels : technical delivery conditions BS EN 10249 -1 : 1996 : cold formed sheet piling of non alloy steels : technical delivery conditions

Tianjin Zhongshun Petroleum Steel Pipe Co.,Ltd

Tianjin Zhongshun Petroleum Steel Pipe Co.,Ltd. is a specalized manufacture of petroleum steel pipe, founded in 1995.It is located in the steel Base,Daqiuzhuang Town which is well-known all over the world.


Product Description:

shipbuilding steel stock


ABS,LR shipbuilding steel


steel for shipbuilding and oil platform:

Henan BEBON Iron & Steel Co., Ltd , is professional in exporting the steel for shipbuilding and oil platform. Our product have the following several feature
1.The size of steel plates we can supply is 3mm-180mm * 1250mm-4000mm * 3000mm-18000mm
2.The main standard our steel is according to ASTM A131,API.
3.The main classification society we cooperate are: ABS ,GL, LR, BV, NK,DNV,KR,RINA.
4.Productive technology: HR,CR,TMCP,N,Q&T,IMPACT TEST,Z15,Z25,Z35.
5.Hard stamp about the brand of manufacturer, Heat No.,Batch No., steel grade, steel size, and the brand of Classification Society.
6.Blasting according to SA2.5 standard, and the shop primed on the steel, coating thickness is 15-35 micrometer.


Get In Touch24/7 Support

We receive enquiries in English, Español (Spanish). Our professional team will reply to you within one business day. Please feel free to contact us!

Leave a Message Email: sales4@bebonchina.com